(Stock Rom) Oppo Reno 8z 5G CPH2457 Firmware Flash File Free

0
Share

The official stock firmware is now available for Oppo Reno 8z 5G and you can download it from below. By using this firmware you can fix all software issues in your Oppo Reno 8z 5G like hang logo, FRP lock, fastboot mode, blank or white display after flash, dead recovery, dead off flash etc. .

Oppo Reno 8z 5G runs on Android 12 and is powered by Mediatek processor. It is a dual SIM smartphone support nano SIM card, connectivity features include hotspot, GPS, Wi-Fi and Bluetooth. The device comes with 6GB RAM and 128GB storage which can be expanded via SD card.

Firmware Information:
Device NameOppo Reno 8z 5G
ROM TypeFull ROM
SoCMediatek
OSAndroid 12
PasswordNull
Root AccessNo
RegionGLO
Firmware VersionA.02

Pre-Requirement’s

  • make a complete backup of your device

Download Links:

How to Install Stock Firmware on Oppo Reno 8z 5G:

  • unpack downloaded Firmware (ofp) using this tool
  • Install Mediatek VCOM driver on Your computer
  • disable SLA Authentication by using this tool (if not disabled You will face a BROM error or flash tool Require a Authorized account/ID)
  • Download & Extract SP tools on your computer
  • from the flash tool folder Run flash_tool.exe
  • set the connection like below image (option/connection)
  • Go to Download tab Click Scatter and load scatter file from ROM folder
  • Select ‘Download only’
  • Click ‘Download’
  • connect Your switched off Phone to computer by using usb cable (press Volume up and down key + Insert usb) (make sure all driver are installed, if no usb VCOM device then you have to do test point)
  • flashing Process started. once done, unplug device & switch it ON

using ROM2box:

  • move all partition images to single folder
  • Run ROM2box.exe
  • Go to Mediatek/Firmware Flasher
  • Select ‘All Partition‘ Option, Locate Firmware folder
  • Click ‘Flash’ button
  • Once the process Started, turn Phone OFF, Now together Press Volume up + down key & Insert USB, Once Phone detected Immediate Release key (make sure your phone stable in device manager)
  • once finished
  • disconnect device
  • again connect device once charging started unplug and Switch it ON

Note: if any issue like ‘file Not found’ then change file format from .img to .bin that all you have to do.