How to Unlock the Bootloader on Vivo iQOO Neo 6 (Best Method)

0
Share

In this guide, we will show you the steps to unlock bootloader on your Vivo iQOO Neo 6. Over the past few years, we’ve been seeing quite a few entries into the new affordable flagship segment. Among them, it is Vivo’s devices that have grabbed the attention of the public. In this regard, one need look no further than the sixth iteration of the iQOO series.

However, despite all the goodies it has to offer, it has fallen short in custom development, largely due to restrictive measures by OEMs. Fortunately, the developers managed to do a nifty trick that will help you unlock the bootloader on your Vivo iQOO Neo 6 easily. So without further ado, let’s check how it can be done.

Advantages and disadvantages of unlocking the bootloader

Unlocking the bootloader is the gateway to reaping the maximum benefits of Android’s open source ecosystem. For example, you’ll be able to install a custom ROM or flash a custom recovery like TWRP. Similarly, by rooting your device through Magisk you will be able to access the system partition as well as gain administrative privileges. This will allow you to flash Magisk Modules, Xposed Framework, Substratum Themes, and Viper4Android among others.

However, performing these adaptations also poses some uncalled-for risks. To begin with, it will erase all data and may even void the device’s warranty. Along the same lines, it will downgrade the Widevine L1 certification to L3, thus preventing you from streaming content in HD [FIXED]. SafetyNet will also be activated [FIXED], thus preventing you from using banking apps [FIXED]. So if that’s fine and good, let’s start with the steps to unlock bootloader on your Vivo iQOO Neo 6.

How to Unlock Bootloader on Vivo iQOO Neo 6

STEP 1: Download Modified ADB & Fastboot

  1. To begin with, download and extract the modified ADB and Fastboot Tool.
  2. Then download the modified Fastboot Binary.
  3. Now extract it inside the same folder where you had extracted the above tool.
  4. It will now ask you to replace the AdbWinApi.dll and fastboot.exe files, reply YES

STEP 2: Enable USB Debugging and OEM Unlocking

STEP 3: Downgrade Vivo X80 Pro to Android 12

  • Download the 12.0.11.2 firmware and transfer it to your device‚Äôs Internal Storage, but not inside any folder
  • Now open CMD inside the ADB & Fastboot folder.
  • Then execute the below command to boot your device to recovery mode
adb reboot fastboot
  • Now performs local update using the 12.0.11.2 firmware and wait for the process to complete.
  • Once done, your device will boot to the Android 12 OS.

STEP4: Boot Vivo iQOO Neo 6 to FastbootD Mode

  • Now connect your device to the PC via USB cable. Make sure USB Debugging is enabled.
  • Then head over to the ADB & Fastboot folder, type in CMD in the address bar, and hit Enter. This will launch the Command Prompt.command prompt
  • Type in the following command in the CMD window to boot your device to FastbootD Mode
adb reboot fastboot
  • After that, use the below command to reboot to the FastbootD Mode.
fastboot reboot fastboot

STEP 5: Unlock Bootloader on Vivo iQOO Neo 6

  • To begin with, download any partition IMG file and transfer it to the ADB & Fastboot folder [Why? See FAQ below]. For this guide, we are using the vendor.img.
  • Likewise, make sure you have two CMD windows opened in the ADB & Fastboot folder.
  • Now execute the below command in the first CMD window to initiate the unlock process [it will fail as of now, not an issue]
fastboot vivo_bsp unlock_vivo
  • unlock bootloader vivo iQOO Neo 6
  • Then switch over to the second command prompt window and execute the below command [Since your bootloader is currently locked, the flashing will give an error, that is completely normal]
fastboot flash vendor vendor.img
  • unlock bootloader vivo iQOO Neo 6
  • Now switch back to the first CMD window and keep on executing the below unlock command until you get the Okay Finished message
fastboot vivo_bsp unlock_vivo
  • unlock bootloader vivo iQOO Neo 6
  • Your device will undergo a data wipe, unlock the bootloader, and finally boot to the OS. You may also use the below command to boot the device to the OS
fastboot reboot

that’s it. These were the steps to unlock bootloader on your Vivo iQOO Neo 6. We will contact you with a solution as soon as possible.