How to Unlock Bootloader on Infinix Note 10/Pro | Best Method 2022

0
Share

In this guide, we will show you the steps to unlock bootloader on your Infinix Note 10 / Pro devices. Infinix devices are definitely in the race for popularity. In this regard, his note series has been successful in gaining public attention. Adhering to its USP of being feature-rich in nature and at the same time not piercing its pockets, the popularity of these devices was already on the cards.
Another interesting factor as to why it quickly became a favorite of the mob was its impressive performance in custom development. There’s a lot to try, whether it’s flashing a custom ROM, installing a custom recovery like TWRP, or gaining administrative access by rooting the device via Magisk. However, before you can try any of these tweaks, you need to check one important condition from the list – the boot loader on your Infinix Note 10 / Pro device needs to be unlocked. Is. And in this guide, we’ll show you how to do it. Follow along.

Advantage of an Unlocked Bootloader

Unlocking the bootloader is the gateway to get the most out of Android’s open source ecosystem. For example, you’ll be able to install custom ROMs or flash custom recovery like TWRP. Similarly, you will be able to access the system partition as well as get administrative privileges by rooting your device through Magisk. You will then be allowed to flash Magisk Modules, Xposed Framework, Substratum Themes, and Viper4Android among others.

However, performing these adaptations also poses some unintended risks. To begin with, it will erase all data and may even void the device’s warranty. With these lines, it will reduce the WideVine L1 certification to L3, thus preventing you from streaming content in HD [FIXED]. SafetyNet will also be activated [FIXED], thus preventing you from using banking apps [FIXED]. So if this is ok and good then let’s start with the steps to unlock the bootloader on Infinix Note 10 / Pro.

How to Unlock Bootloader on Infinix Note 10/Pro

The following movement will erase all records out of your tool. So please returned up a entire tool in advance. Droidwin and its contributors will now no longer be held accountable withinside the occasion of a thermonuclear war, your alarm does now no longer wake you up, or if some thing takes place on your tool and records via way of means of taking the subsequent steps.

STEP 1: Install Android SDK

install adb platform tools windows

First and foremost, you may ought to set up the Android SDK Platform Tools in your PC. This is the authentic ADB and Fastboot binary supplied via way of means of Google and is the most effective endorsed one. So down load it after which extract it to any handy place in your PC. Doing so will provide you with the platform-gear folder, a good way to be used at some point of this guide.

Download : Link

STEP 2: Enable USB Debugging and OEM Unlocking

Next up, you may should allow USB Debugging and OEM Unlocking to your tool. The former will make your tool recognizable through the PC in ADB mode. This will then will let you boot your tool to Fastboot Mode. On the opposite hand, OEM Unlocking is needed to perform the bootloader unlocking process.

So head over to Settings > About Phone > Tap on Build Number 7 times > Go back to Settings > System > Advanced > Developer Options > Enable USB Debugging and OEM Unlocking.

STEP 3: Boot Infinix Note 10 Pro to Fastboot Mode

  1. Connect your device to the PC via USB cable. Make sure USB Debugging is enabled.
  2. Then head over to the platform-tools folder, type in CMD in the address bar, and hit Enter. This will launch the Command Prompt.
  3. Type in the following command in the CMD window to boot your device to Fastboot Mode
adb reboot bootloader
  1. Now type in the below command to verify the Fastboot Connection
fastboot devices
  1. If you get a device ID followed by the fastboot keyword, then the connection stands successful and you may now proceed ahead to unlock the bootloader on your Infinix Note 10/Pro.

STEP 4: Unlock the Bootloader on Infinix Note 10/Pro

  1. Type in the below command in the CMD window that is opened inside the platform-tools
fastboot flashing unlock
  1. At this point in time, you will get a confirmation message on your device. Use the Volume keys to select the Unlock the Bootloader option and hit the Power key to confirm it.
  2. The device will undergo a reset and then the bootloader will be unlocked. Do keep in mind that the first boot might take up to a minute, this is completely normal.
  3. Furthermore, you will have to log in to Google ID and set up your device from scratch, since a wipe has taken place. That’s it.

These were the steps to unlock the bootloader on the Infinix Note 10 / Pro. If you have any questions about the above steps, let us know in the comments. We will contact you with a solution as soon as possible.