How to Install Stock Rom on Sumsung Phones | Downgrade and Unbrick Phone | Best Method

0
Share

In this guide, we will explain how to install stock firmware on Samsung phones using ODIN firmware flash tool. Odin has its own built-in program tool for flashing firmware in Samsung phones and the best part of this tool is easy to use. With this guide, you can brake your Samsung phone, or fix the boot loop, and even upgrade your phone by flashing the Samsung firmware for your phone.

Boot loop or brick devices are the most common in Android phones these days, when some custom ROMs on the phone flash in some mode, sometimes the phone gets stuck on the boot loop or with soft bricks. So flashing Samsung’s firmware at this time is the best way to solve all the problems. To do this, Samsung has released a separate Odin tool (also known as Odin Downloader or Odin Flash Tool). What is the best way to install stock firmware on your Samsung device? To get started, you need a PC and firmware for your phone.

If you are wondering how to flash stock firmware on your Samsung phones then this process is really simple and easy to use. In this guide, we will show you how to flash stock firmware on Samsung Galaxy devices using Odin.So read all the steps carefully and follow all the steps one by one on your phone.

Download Link and Pre-requisites

  • Before you go ahead with the procedure, do take the complete backup of your Samsung phone.
  • Install the ADB USB drivers on your PC.
  • Make sure to charge your device to at least 60%.
  • Download the latest version of the Odin tool.
  • Make sure to enable USB Debugging – To do that again, head to the Settings>>Developer Options>> allow USB Debugging.
  • Download Stock Firmware for Your Samsung Phone here.

How To Install Stock Firmware on Samsung Phone Using Odin

1. Boot your phone is Download Mode- Enter your Galaxy device into the Download mode by pressing Volume Down + Power buttons and connect the USB cable for Samsung phones with capacitive buttons and Volume Down + Bixby + Power for newer models.

Samsung download mode

2. Download the appropriate Galaxy stock firmware for your phone from the above mention links and unzip the folder on your desktop.

3. Now download and extract the Odin tool on your PC and run the Odin.exe file to get started.

4. Now in the Odin application. Click on the ‘BL’ button, then choose the file that starts with “BL” inside your extracted firmware folder. Next, click on the ‘AP’ button in Odin and choose the AP file. Click on the ‘CP’ button, choose the CP file inside your extracted firmware folder. Click on the ‘CSC’ button, choose the HOME_CSC or CSC (If you want to clean flash then choose CSC file if you don’t want to clean your data then choose HOME_CSC file) file inside your extracted firmware folder.

Make sure all four files are loaded and checkmarks appear next to each button. When you are ready, click on the “Start” button at the bottom of the Odin application.

5. Now the flashing process will start on your Samsung phone and it take 6 to 7 minutes to complete.

6. Once the flashing process is complete, you will get a PASS! message on Odin and your phone will reboot.

So this way you can install stock firmware on Samsung phones. If you have any questions or concerns regarding this guide, please leave a comment below, and we’ll help you resolve them.