Download and install Vivo PD2171 Firmware Stock ROM

0
Share

The official stock firmware is now available for Vivo PD2171 and you can download it from below. By using this firmware you can fix all software issues in your Vivo PD2171 like hang on logo, FRP lock, fastboot mode, blank or white display after flash, dead recovery, dead after flash etc. .

Vivo PD2171 runs on Android 12 and is powered by QCOM 8 gen 1 processor. It is a dual sim smartphone support nano gsm sim card, connectivity options include 3G 4G 5G GPS, Wi-Fi, Bluetooth etc. The device comes with 8/12GB RAM and 256GB storage which is not expandable via SD card.

  • make a backup before Process
  • it will erase all your data Including Internal storage
Must Require:
Firmware Information:
Device NameVivo iqoo PD2171
ROM TypeFull ROM
SoCQCOM 8 Gen1
OSAndroid 12
PasswordNull
GappsNot Included in CN ROM
Root AccessNo
RegionCN
Firmware VersionPD2171_A_12.0.18.7.W10.V000L1

Downloads Links:

Available Firmware~

  • PD2171_A_12.0.18.7.W10.V000L1 recovery ROM CN: Download
  • PD2171_A_12.0.18.7.W10.V000L1 EDL ROM CN: coming soon

Flash Tools:

usb Driver: 

How to Flash Vivo PD2171 Via MI Flash tools:

  • Download and Install usb driver on computer
  • Download Extract & Install MI Flash
  • Now Run MI Flash Click Refresh
  • Select Extracted Fastboot ROM folder
  • Reboot Phone to Bootloader (or EDL Mod) and connect it to computer
  • Click Start and wait until success. once done, disconnect device & switch it ON

test Point Pinout for EDL Mod:

coming soon….

How to Install recovery ROM:

  • Download firmware update Package from above and move it to device storage
  • reboot phone to recovery mod (Switch off= volume up + power key)

from recovery mod click wipe data and wipe all data

  • Now select “Install update” and then locate downloaded firmware file from storage.
  • click Install. wait until success. once done, Reboot system Now.