Download and Install Pixel Experience on OnePlus 10 Pro


In this guide, we will show you the steps to install Pixel Experience ROM on your OnePlus 10 Pro device. The OEM has probably been going through a rough patch for the past few months, and its decision to incorporate elements of Oppo’s ColorOS into its in-house OxygenOS plays a major role in that. Even in custom development things aren’t getting much better either with the MSM tool now requiring an authorized account to login.

But wait, it looks like there’s still some light at the end of the tunnel, all thanks to generic system images. In this regard, Pixel Experience, one of the most popular custom ROMs, has reached this device in the form of GSI. As its name suggests, it will give you a clean stock-like UI experience with the Material You theme and a few Pixel goodies. So without further ado, let’s get started with the steps to install Pixel Experience ROM on your OnePlus 10 Pro.

Information of Pixel Experience

Android Version : 12.1

Status : Stable

Custom ROM : Pixel Experience

Devices : OnePlus 10 Pro

Download Pixel Experience for OnePlus 10 Pro

Download: Pixel Experience ROM
Pixel Experience OnePlus 10 Pro

How to Install Pixel Experience ROM on OnePlus 10 Pro

The instructions given below are listed in separate sections for ease of understanding. Make sure to follow the same order as mentioned. and its members will not be held responsible in the event of a thermonuclear war, your alarm does not wake you up, or if something happens to your device and data by performing the following steps.

STEP 1: Install Android SDK

install adb platform tools windows

Download : Link

STEP 2: Download Pixel Experience for OnePlus 10 Pro

STEP 3: Unlock Bootloader on OnePlus 10 Pro

STEP 4: Extract OnePlus 10 Pro Payload.bin

  • To begin with, download and extract the stock firmware for your device.
  • Once extracted, you will get a couple of files, including the payload.bin file.
  • So exact this payload file
  • Once the extraction is complete, copy the vbmeta.img file from there.
  • Then transfer it to the platform-tools folder on your PC.

STEP 5: Boot OnePlus 10 Pro to FastbootD Mode

  • Connect your device to the PC via USB cable. Make sure USB Debugging is enabled.
  • Then head over to the platform-tools folder, type in CMD in the address bar, and hit Enter. This will launch the Command Prompt.
  • Type in the following command in the CMD window to boot your device to Fastboot Mode
adb reboot bootloader
  • Finally, type in the below command to boot your device to the Fastboot Mode
fastboot reboot fastboot

STEP 6: Delete cow Partitions

  1. Download the Fastboot Enhance Tool and extract it on your PC. Then launch it via its EXE file.
  2. Your device should be listed under the Fastboot Virtualization tab, click on it.
  3. After that, go to the Partitions tab and type in cow in the Filter by name box.
  4. Select all the partitions from the results that have cow in their name and hit the Delete button.

STEP 7: Flash Pixel Experience ROM on OnePlus 10 Pro

  • To begin with, extract the GSI ROM inside the platform-tools folder.
  • Then rename it the ROM file to system, so that the complete name becomes system.img.
  • Also, make sure that the vbmeta file is also present inside the platform-tools folder and your device is booted to FastbootD Mode.
  • If that’s well and good, then use the below command to flash vbmeta and hence disable the verification check
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
  • After that, erase the system partition via the below command
fastboot erase system
  • Then use the below command to flash the GSI ROM onto your OnePlus 10T
fastboot flash system system.img
  • Once done, you may now boot your device to the newly installed ROM via the below command
fastboot reboot

That’s it. These were the steps to install custom/GSI ROM on your OnePlus 10 Pro. If you have any queries regarding the above steps, let us know in the comments. We will contact you with a solution as soon as possible.